4/3/2024 0 Comments Change port in tiny pxe server![]() ![]() Note: Your comments/feedback should be limited to this FAQ only. To change the default setting, you have two options:ġ) Go to BIOS setup, Advanced -> PCIe/PCI/Pnp Configuration -> BCM57810S 10G OPROM set to disable.Ģ) Go to BIOS setup, Boot -> Network Device BBS Priorities -> 1st Device ? Change settings from “BRCM MBA …” to “IBA GE Slot 8400 v1513”, which is the name for on-board 1G LAN. This is normal because the board is configured to try the 10G links first and if that is unsuccessful it will failover to the 1G Links. Tiny PXE Server will run and be preconfigured. but as soon as i disable this option the PXE boot fails to get ip address from the dhcp. I have DHCP/tfpt/nfs server running on my linux box Everything is working fine as long my client ports on the switch are enabled with spanning-tree port-fast. ![]() How do I enable PXE boot from the GigE port? Press F10 to save the changes you have made and restart the computer. I have a pxe based linux kick start install. On the Properties window, in the DHCP tab, un-check the two boxes then click OK. Open the WDS server console, right-click the server name and choose Properties. When using PXE boot, the machine is only trying the Broadcom 10G ports. Since we were talking about DHCP options 66 and 67, we also need to configure them by actually disable these options on our WDS server. I have a server that has both GigE and Broadcom 10G on-board ports. FAQ Entry | Online Support | Support - Super Micro Computer, Inc.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |